Earthly has the ability to share cache between different isolated CI runs and even with developers via remote caching. This page goes through the available features, common use-cases and situations where remote caching is most useful.
Remote caching is made possible by storing intermediate steps of a build in a cloud-based Docker registry. This cache can then be downloaded on another machine in order to skip common parts.
Note that there is yet another way to share cache between builds, via Earthly Remote Runners (a commercial version of remote runners is Earthly Satellites). Using the cache of a remote runner is easier to manage, because there is no upload or download step (the cache is always there, available instantly) and no additional experimentation is required (everything is automatically cached without the need to experiment). This page only covers remote shared caching through the use of a registry.
Earthly makes available two types of remote caching:
Not all registries support the needed manifest formats to allow the usage of each kind of cache. Here is a compatibility matrix for many popular registries:
Supports Inline Cache
Supports Explicit Cache
Google Artifact Registry
GitHub Container Registry
GitLab Container Registry
Only versions > 7.31.10 work, due to https://www.jfrog.com/jira/browse/RTFACT-26179
Inline caching is the easiest to configure. It essentially makes use of any image already being pushed to the registry and adds some very small metadata (a few KiB) as part of its configuration about how Earthly is able to reuse that image for future runs.
The key benefit of this approach is that you get the upload for free if you anyway push images to the registry.
In order to enable inline caching, add
--use-inline-cache --save-inline-cachein your invocation of
--use-inline-cache --save-inline-cache --pushflags are specified, the use of the cache will be read-write.
Use a read-only inline cache (on a developer's computer or in PR builds):
earthly --use-inline-cache +some-target
Use a read-write inline cache (typically in master/main branch builds):
earthly --use-inline-cache --save-inline-cache --push +some-target
The options mentioned above are also available as environment variables. See Earthly command reference for more information.
The way this works underneath is that Earthly uses
SAVE IMAGE --pushdeclarations as source and destination for any inline cache.
In case different Docker tags are used in branch or PR builds, it is possible to use additional cache sources via
SAVE IMAGE --cache-from=.... This may be useful so that PR builds are able to use the main branch cache. Here is a simple example:
SAVE IMAGE --cache-from=mycompany/myimage:master --push mycompany/myimage:$BRANCH
--use-inline-cacheflag is required to enable importing existing caches, and the
--save-inline-cacheflag is required to enable exporting images to the remote cache.
VERSION 0.6the inline cache is only exported to images that are connected to the initial target through a chain of BUILD commands.
Inline caching is very easy to use, however it can also turn out to be ineffective for some builds. One limitation is that only the layers that end up in uploaded images are actually used. Certain intermediate layers (e.g. targets only used for compiling binaries) will not exist.
If you find that certain steps could benefit from being cached but are not, you may consider creating additional images for those steps specifically. All you need to do is add the following at the end. Use a Docker tag that is not used for anything else.
SAVE IMAGE --push <docker-tag>
Note however that adding more images to the build results in additional time spent uploading them. Disregard the performance of the very first upload, as a fresh push is always less performant because there is no commonality with any previous run.
In the C++ case, a lot of computation is saved as a result of the
apt-get installcommand. Reusing the cache improves performance by a factor of 4X.
In the Scala case, time is saved from processing the dependencies, resulting in a 3X performance improvement.
In both cases, a major benefit is that we are anyway pushing the images to the cloud via the
SAVE IMAGE --pushcommands. So there is no performance penalty on the cache upload side. The command that would be used in the CI to execute the builds together with inline caching is
earthly --use-inline-cache --save-inline-cache --push +docker
Explicit caching requires that you dedicate a Docker tag specifically for cache storage. Unlike inline caching, this tag is not meant to be used for anything else. For this reason, uploading the cache is an added step that takes additional time.
To enable explicit caching, use the flag
--remote-cache=...to specify the Docker tag to use as cache. Make sure that this Docker tag is not used for anything else (e.g. DO NOT use
myimage:latest, in case
latestis used in a critical workflow).
For example, if the Docker tag used for explicit caching is
mycompany/myimage:cache, then the flag can be used as follows.
In CI, read-only inline cache (typically in PR builds):
earthly --ci --remote-cache=mycompany/myimage:cache +some-target
In CI, read-write inline cache (typically in master/main branch builds):
earthly --ci --remote-cache=mycompany/myimage:cache --push +some-target
On developer's computer (optional):
earthly --remote-cache=mycompany/myimage:cache +some-target
The options mentioned above are also available as environment variables. See Earthly command reference for more information.
If a project has multiple CI pipelines or
earthlyinvocations, it is recommended to use different
--remote-cacheDocker tags for each pipeline or invocation. This will prevent the cache from being overwritten in ways in which it makes it less effective.
It is currently not possible to push both inline and explicit caches in a single run.
Explicit caching works by storing a cache containing all the layers of the final target, plus any target containing
SAVE IMAGE --push .... If additional targets need to be added as part of the cache, it is possible to add
SAVE IMAGE --cache-hint(no Docker tag necessary) at the end, in order to mark them for explicit caching.
COPY go.mod go.sum ./
RUN go mod download
SAVE IMAGE --cache-hint
Making use of explicit caching effectively may not always be possible. Sometimes the overhead of uploading and redownloading the cache defeats the purpose of gaining build performance. Oftentimes, multiple iterations of trial-and-error need to be attempted in order to optimize its effectiveness. Keep in mind that caching compute-heavy targets is more likely to yield results, rather than download-heavy targets.
As an additional setting available, Earthly can be instructed to save all intermediary steps as part of the explicit cache. The setting
--max-remote-cachecan be used to enable this. Note that this results in large uploads and is usually not very effective. An example where this feature is useful, however, is when you would like to optimize CI run times in PRs, and are willing to sacrifice CI run times in default branch builds. This can be achieved by enabling
--max-remote-cacheon the default branch builds only.
A good example of using explicit caching is this integration test example. The target
+project-filesis perfect for introducing a cache hint via
SAVE IMAGE --cache-hint. The processing that takes place as part of installing Scala and compiling the dependencies is sufficiently compute-intensive to save ~2 min from the total build time in CI. In addition, these dependencies change rarely enough that the cache can be utilized consistently.
A typical invocation of the build to make use of the explicit cache:
earthly --ci --remote-cache=mycompany/integration-example:cache --push +all
Inline and explicit caching have similar traits, but they also have a number of fundamental differences.
The key similarity is that both types of caches make use of Docker tags being pushed to an image registry in order to store the cache.
The most important difference is that inline caching relies on image uploads that are already being made. And as such, the cache may be split across multiple separate images. Every
SAVE IMAGE --pushcommand adds more cacheable targets in the form of separate images. However, in the case of explicit caching, the entire cache is stored as part of a single Docker tag and every
SAVE IMAGE --cache-hintcommand adds more cacheable targets within the image. This final image containing all the explicit cache cannot be used for anything else. So as a user, you incur the performance cost of both the upload and the subsequent download.
Below is a summary of the different characteristics of each type of cache.
- Cache is embedded within images that are already being pushed. No new layers are added to the images, only a few KiB of metadata.
- Very easy to use (just add
earthlyinvocations in CI)
- It is usually effective right away, with little modifications
- Typically you incur the performance cost only for the subsequent download. Upload is for free if you are pushing images anyway
- By default, caches only the images being pushed
- You can add more cache via additional
SAVE IMAGE --push <docker-tag>commands
- Cache is uploaded as part of a new Docker tag that should not be used for anything else
- The only available choice if no images are already pushed during the build
- More control over what is being cached and what is not. However it often requires some level of experimentation to get right.
- Incur the performance cost for both the upload and the download
- By default, caches only the layers of the target being built, and not of any other referenced targets
- You can cache additional targets by adding
SAVE IMAGE --cache-hintcommands
There are several situations where remote caching can provide a significant performance boost. The following are only a few examples of how to get a feel for its usefulness.
In general remote caching is very useful when there is a significant computation overhead during the execution of your build. Assuming that the inputs of that computation do not change regularly, then remote caching could be a good candidate. If a time-consuming operation, however, is not compute-heavy, but rather download-heavy, then remote caching may not be as effective (it's one download versus another).
As an example of this distinction, consider the use of the
apktool shipped in
alpineimages. Installing packages via
apkis download-heavy, but usually not very compute-heavy, and so using remote caching to offset
apkdownload times might not be as effective. On the other hand, consider
apt-gettool shipped in
ubuntuimages. Besides performing downloads,
apt-getalso performs additional post-download steps which tend to be compute-intensive. For this reason, remote caching is usually very effective here.
Similarly to the comparison between
apt-get, similar remarks can be made about the various language-specific dependency management tools. Some will be pure download-based (e.g.
go mod download), while others will be a mix of download and computation (.e.g
An area where remote caching is particularly impactful are cases where a rare-changing prerequisite downloads many dependencies and/or performs intensive computation, but the end result is relatively small (e.g. a single binary). Passing this prerequisite over the wire as part of the remote caching is very fast (especially if the downloads required to generate it are not used anywhere else), whereas regenerating it requires a lot of work.
An excellent example of the above are typical inter-project dependencies. Regardless of whether your layout is a monorepo or a polyrepo, if projects reference artifacts or images from each other, then whatever tools used to generate those artifacts or images are usually not required across projects. In such cases it is possible to prevent entire target trees of downloads and computation and simply download the final result using the remote cache.
A simple way to visualize this use-case is comparing the performance of a build that takes place behind a
FROM +some-targetinstruction versus just using the previously built image directly. If
SAVE IMAGE --push myimage:latestinstruction, then the performance becomes almost the same to using
Modern CIs execute in a sandbox. They start with a blank slate and need to download and regenerate everything from scratch. Examples of such CIs: GitHub Actions, Circle CI, DroneCI, GitLab CI. Such CIs benefit greatly from being able to share precomputed steps between runs.
If, however, you are using a CI which reuses the same environment (e.g. Jenkins, BuildKite - depending on how they are configured), then simply relying on the local cache is enough.
It is possible to use cache in read-only mode for developers to speed up local development. This can be achieved by enabling read-write remote caching in CI and read-only cache for individual developers. Since all Earthly cache is kept in Docker registries, managing access to the cache can be controlled by managing access to individual Docker images.
Note however that there is small performance penalty for regularly checking the remote registry on every run.
An alternative to using remote caching is to use Earthly Remote Runners (a commercial version of remote runners is Earthly Satellites). Remote runners execute the build remotely, and this allows the cache to be located in close proximity to the execution, which is very efficient. Satellites are also significantly easier to set up, as the caching just works and there is no need for additional experimentation.